You may have experienced blades that shake, wobble and chatter when attached to your clipper. When this happens, check to be sure that the hinge screws have not come loose. If they have, tighten them down as needed. If the problem persists, you may have a bent blade bracket (socket). Using a pair of large pliers or channel locks, simply bend the socket ears slightly inward and then reset the blade on the clipper. It may be necessary to change out the socket if blades continue to wobble.
In this video, Gary demonstrates how to address a noisy, wobbly clipper blade.
Hi,
I would like to know how to replace a K-9 II brushes of the second motor that is inside the dryer, do you have a chematics or a video to show me how to change them ?
Thank you
Sincerely
Edy Duran
Edy,
My Gary’s tips video shows how to change the brushes on the motor. To do the back motor you have to pull out the front motor and reach down inside the canister housing and do the same. It can be tricky and some what difficult if you have never done it before. You can call our service dept. and ask for our dryer tech (Nebo) to help you through it. He is very good at this and has helped other customers before.
Gary
http://blog.ryanspet.com/get-your-drying-equipment-ready-for-the-holidays/